Any damage to the teeth surfaces of the sprocket diminishes the daily life of the conveyor chain.
With typical sprockets, substantially worn sprocket teeth had been repaired by teeth padding or the total sprocket was replaced. In either case, fix was pricey and with teeth padding, accuracy was impaired. We designed new sprockets with detachable teeth for independent replacement. This sprocket is extremely rated by our customers for that dramatic cost savings in expense and time.
Framework
The teeth is usually replaced by two strategies: personal tooth replacement or sectional teeth replacement.
The bolts and nuts utilized for mounting the teeth on for the sprocket are spot-welded to stop loosening.
The respective structures are illustrated over the correct.
The above photo along with the prime right illustration display a sprocket for personal tooth replacement. Because the joint face in between the replaced teeth as well as sprocket is formed in a unique arc, the bonding accuracy is substantial and the sprocket power is enhanced. Additionally, because the load acting within the mounting bolts is decreased, there exists much less probability of loosening. This sprocket construction is patented.
There are two styles of hubs: cast steel and welded sheet steel hubs. Cast steel hubs are employed for substantial sprockets obtaining heavy loads and welded sheet steel hubs for other applications.