DC MOTOR PUMP GROUP 1
Common Description
Consisting of a hefty duty DC motor along with the CB1S gear pump, this pump motor group is surely an great hydraulic electrical power unit for mobile hydraulic equipments, such as car or truck carriers, mobile aerial lifts, and backup programs.
DC MOTOR PUMP GROUP two
General Description
This motor pump consists of four.5″ DC motor, a CBSR gear pump with built-in relief valve and check valve.
DC MOTOR PUMP GROUP 3
Common Description
This motor pump consists of a 4.5″ DC motor and also a CBSR gear pump that has a standard power up/gravity down circuit using a relief valve, a test valve and also a solenoid release valve.
Particular Notes
1. This power unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
two. Clean every one of the hydraulic components concerned before mounting the power unit.
3. Viscosity from the hydraulic oil shoud be 15~68 cst, which must also be clean and absolutely free of impurities. N46 hydraulic oil is proposed.
4. The energy unit need to be mounted horizontally.
five. The relief valve pressure is preset about 25% greater than the operating stress.
six. Flow management valve for lowing pace adjustment is available unpon request.