one.A connecting website link of an O-ring Chain for standard application is pre-coated with grease at the pins. In advance of connection, confirm the grease about the surfaces of pins, and in case the amount of grease is compact, apply grease with bare hands. (If gloves are made use of, the grease will probably be absorbed through the gloves.)
Illustration: When the connecting link (I) of an O-ring chain for standard application is
shipped, O-rings are fitted at the roots on the pins. In case the O-rings come loose due to vibration throughout transport, refit the O-rings in for the roots of the pins.
In this case, you should definitely return the grease collected in the roots with the pins towards the central surfaces with the pins, more at portion A than at portions B proven within the over illustration. (Portions A is worn due to sliding with the bushings.)
2.The chain could be most effortlessly linked over the teeth of a sprocket. Engage the hyperlinks at both ends in the chain together with the sprocket teeth and match connecting pins. In the event the sprocket could be moved, the chain can also be connected about the loosened side.
three. Connecting process
1.Confirm that O-rings are attached to the roots of the pins.
two.Should the amount of grease applied over the connecting pins is compact, coat the pins with grease at the central portions.
3.Insert the connecting pins into the bushings of your inner hyperlinks at the two ends.
four.Verify that the grease is utilized towards the entire encounter from the O-ring, and fit the O-ring onto the connecting pins.
5.Insert the connecting pins into the connecting plate and though pressing the connecting plate, set up the spring clip. Confirm no matter whether the head (the finish without a split) with the spring clip is turned within the feeding course of the chain. (See the following illustration.)
6.Be sure to verify that the spring clip is securely fitted within the clip 
grooves with the connecting pins.
This completes jointing in the connecting hyperlink. Note that grease to the surfaces of connecting pins and O-rings might be eliminated throughout installation operate. In this instance, re-grease working with the grease around the surface of your base chain or the grease from the polyethylene bag by which the connecting hyperlink was contained.
