Outfitted together with the zero leak bidirectional checking sole-noid valves, this power unit is created for that operation of two independent circuits. Which are respectively for the key and subordinate platforms on the double scissors lift. Two cut-off valves are used for reducing the machine manually in case of power reduction. If extra independent circuits are expected to your application please get in touch with us for availability.
Remark: one. Please consult our income engineer for the various pump displacement, motor energy or tank capacity.
two. CSA or UL certified motors are available on request.
1. The AC motor is of S3 duty cycle, which might only function intermittently and repeatedly, i.e., 1minute on and 9 minutes off.
2. Clean the many hydraulic parts concerned just before installation of the power unit.
3. Viscosity on the oil shoud be 15~46 cst,plus the oil need to be clean and free of impurities,N46 hydraulic oil is suggested.
4. The power unit must be mounted vertically.
five. Check the oil degree in the tank immediately after the original working from the power unit.
6. Oil changing is needed just after the original one hundred operation hours,afterwards as soon as each and every 3000 hours.