Material Handling Power UNIT one
Standard Description
This power unit is designed for your fork lift marketplace, consisting of hugely efficient gear pump, DC motor, manual increase and decrease valve, tank, ect. The up and down movement are controlled by the lever of your guide release valve, and that is outfitted with an electrical switch to activate the motor. The lowing pace is managed through the pressure compensated movement handle valve.
Distinctive Notes
one. The duty of this electrical power unit is S3, i.e. thirty seconds on and 270 senconds off.
2. Clean every one of the hydraulic components concerned prior to set up of the electrical power unit.
3. Viscosity of your hydraulic oil shoud be 15~46 cst, which really should also be clean and free of impurities, N46 hydraulic oil is suggested .
four. Oil transforming is needed soon after the initial 100 operation hrs, afterwards once each and every 3000 hours.
five. The electrical power unit shown is built to be mounted horizontally.

Materials Managing Power UNIT 2
Common Description
This electrical power unit characteristics electrical power up gravity down circuit. Activate the get started solenoid to begin the motor to lift the machine. The lowing movement is activated from the solenoid valve with the lowering velocity controlled from the stress compensated movement handle valve. Products of this series might be broadly utilized in the marketplace of logistic products like fork lift, mini lift table, and so on.
Distinctive Notes
one. The duty of this electrical power unit is S3,i.e.,30 seconds on and 270 senconds off.
2. Clean the many hydraulic elements concerned just before mounting the electrical power unit.
3. Viscosity from the hydraulic oil shoud be 15~46 cst,which should really also be clean and cost-free of impurities, N46 hydraulic oil is encouraged .
four. Oil shifting is needed following the preliminary one hundred operation hours,afterwards as soon as each 3000 hrs.
five. The electrical power unit must be mounted horizontally.