Downsizing Your Process 
with Greater Electrical power Chains
HK style roller chains conform to H type of ANSI, and their thickness of inner and outer website link plates are equal to these on the up coming greater dimension chain. Therefore, HK kind roller chains are greater in tensile power by about 20%and in maximum allowable load by about 15% than those of common roller chains. Because the bodyweight in the chains can be larger, HK type roller chains are ideal for your application of heavy duty at very low pace.
Advisable employs
?Optimum for locations the place higher strength is needed but substantial and heavier chains cannot be utilised.
Variety of chains
Pick a proper HK sort roller chain dependant on “Low-speed selection”
For your highest allowable load, see the following table of dimensions.
HK style roller chains can be found as much as triplex.
Sprockets
Use common sprockets for any simplex HK roller chain Because the transverse pitches are more substantial than those of normal chains from the situation of duplex or triplex, conventional sprockets cannot be utilised. Refer for the sprocket tooth profiles for HK
Connecting link and offset link
The tensile power of connecting back links and offset links are listed around the left, but the highest allowable load is reduced than that on the base chain. Please check with us really should you’ve got any queries. It can be recommended to utilize the connecting hyperlink of interference-fitted (FJ, HJ)
Under no circumstances make the holes on the connecting plate greater and never ever make the pins thinner to facilitate the do the job for fitting the pins in to the connecting plate, since otherwise the fatigue strength might be lowered.
Collection of chains
Decide on a right HK variety roller chain dependant on “Low-speed selection”
For the highest allowable load, see the next table of dimensions.
HK sort roller chains are available as much as triplex.
Sprockets
Use standard sprockets to get a simplex HK roller chain Because the transverse pitches are bigger than people of normal chains from the situation of duplex or triplex, typical sprockets are not able to be utilised. Refer to your sprocket tooth profiles for HK
Connecting website link and offset link
The tensile power of connecting links and offset hyperlinks are listed around the left, but the greatest allowable load is decrease than that from the base chain. Please seek the advice of us must you have got any queries. It is advised to implement the connecting link of interference-fitted (FJ, HJ)
In no way make the holes on the connecting plate bigger and never make the pins thinner to facilitate the do the job for fitting the pins to the connecting plate, considering the fact that otherwise the fatigue strength might be lowered.
